Travel & Logistics
04No matches in this category.
Travel beyond 45 mi of Bluffdale
Per-mile charge for installs outside the home base radius. St. George area billed differently (see below).
$13/MILE
St. George area travel
Per-watt upcharge for installs in St. George region.
$0.15/WATT
Battery travel adder
Additional per-mile fee on battery jobs outside 45 mi of Bluffdale — on top of standard travel.
+$5/MILE
Site survey photos by Spring Solar
If Spring Solar captures site survey photos instead of the sales rep. Salt Lake Valley base price; +$50 outside SLC or Utah County.
$150+$50 OUT-OF-AREA
Roof & Mounting
10No matches in this category.
Ground mount
Standard ground-mount price per watt. Drops to $0.55/W if system is over 10 kW.
$0.75/WATT · $0.55 OVER 10kW
Multiple array adder
Charged when there are more than 2 arrays. Per extra array beyond the second.
$250/EXTRA ARRAY
Metal roof
Per-watt premium for installs on metal roofing.
+$0.10/WATT
Tile roof
Per-panel premium for tile roofs.
$100/PANEL
Wood shaker shingles
Per-panel premium for wood shaker shingle roofs.
$100/PANEL
Flat roof (TPO membrane or gravel)
Per-watt premium for flat-roof installs on TPO or gravel surfaces.
$0.15/WATT
Pitched roof — 35° or greater
Per-panel adder for the area at or over 35 degrees of pitch.
+$35/PANEL
Pitched roof — 45° or greater
Per-panel adder for the area at or over 45 degrees of pitch.
$65/PANEL
Tilt legs
Per-panel adder when panels need tilt legs (typically flat or low-slope).
$75/PANEL
Install on awning
Ballpark figure — needs a custom quote based on awning structure.
~$900QUOTE REQUIRED
Critter Guard
Per-panel adder. Required by Eagle Mountain.
$35/PANEL
IronRidge contour solar skirt
Per linear foot of skirt installed.
$35/FOOT
Electrical & MPU
12No matches in this category.
MPU — 125 amp
Main panel upgrade to 125 amp. Extra costs apply if meter must be moved and siding replaced.
$2,200
MPU — 200 amp
Main panel upgrade to 200 amp. Extra if meter relocation requires siding work.
$2,800
Wyoming MPU
Main panel upgrade for Wyoming installs.
$3,500
Sub panel / fused disconnect for taps
When a sub panel or fused disconnect is used to avoid a full MPU.
$500
Sandy City load calculations
Required on every Sandy City job unless a new MPU is being installed.
$150
Trenching
Case-by-case. Need measurements before quoting. Note: more if homeowner wants sod or grass professionally restored.
$25/FOOT
Concrete demolition & repair
Quoted job-by-job depending on scope.
CASE BY CASE
Support beams added
Structural reinforcement when load calc requires it.
QUOTE
No dead front cover of meter panel
Replacement of missing back-plate cover on meter or service panel.
$300
Meter relocation
Custom quote each time. Typically required if old meter is over 6.5 ft. Extra labor if siding must be replaced.
$1,000–$3,000CUSTOM QUOTE
AC unit relocation
When AC unit blocks the meter. MSP must have 36" clearance.
$800
Drywall patch for MPU
Patch work of drywall when MPU requires it. We do not cover any other drywall repairs.
$300
Vent pipe redirect (Riverton / Saratoga Springs)
Per-vent fee when city won't allow paneling over vents.
$150/VENT
System Sizing
01No matches in this category.
Small system — under 12 panels
Applies to systems under 4.8 kW (12 panels @ 400W). Changed from $500 on June 1, 2023.
$1,000
Panel Upgrades
02No matches in this category.
REC 460
Premium panel upgrade. Per-watt charge.
$0.38/WATT
Hyundai 440
Mid-tier panel upgrade. Per-watt charge.
$0.15/WATT
Inverter Upgrades
03No matches in this category.
Enphase IQ 8+
Per-watt adder. 25-year warranty.
$0.15/WATT
APsystems extended warranty (to 25 yr)
Extends standard APsystems warranty. Per-panel.
$15/PANEL
Sol-Ark Hybrid
Hybrid inverter for battery-backed systems. Contact for current pricing.
CONTACT
Batteries
19No matches in this category.
Delta EcoFlow Pro 3.6 kWh (unit only)
Battery generator unit. Not tied directly to solar — emergency preparedness.
$3,000
Delta EcoFlow Pro — extra 3.6 kWh battery
Add-on battery. Pairs with Delta EcoFlow Pro — up to 2 extras per Pro unit.
$2,300
Delta Pro + extra battery (7.2 kWh total)
Bundle: Delta Pro paired with one extra 3.6 kWh battery.
$5,300
Delta Pro Ultra (6 kWh)
Lead unit for Delta Pro Ultra system.
$4,200
Delta Pro Ultra — extra battery
Expansion battery for Delta Pro Ultra system.
$2,200
Delta Pro Ultra w/ SHP 2 installed
Bundle: Delta Pro Ultra plus SHP 2 auto-switch installed.
$7,200
Delta Pro 3
Standalone Delta Pro 3 battery unit.
$3,000
Delta Pro 3 w/ SHP 2 installed
Bundle: Delta Pro 3 plus SHP 2 auto-switch installed.
$6,000
Delta Pro 3 — extra battery
Expansion battery for Delta Pro 3 system.
$2,300
160W stand-alone solar panel
For Delta-style portable battery systems.
$350
SHP 2 (auto-switch for Delta Pro Ultra / 3)
Smart Home Panel 2 unit + install. $1,500 unit + $1,500 install.
$3,000UNIT + INSTALL
Sonnen 10 kWh (installed)
Includes battery kit, labor, sub panel, breakers, wire, attachments, EMT, and commissioning. No drywall repair.
$15,000
Encharge 10 kW (installed)
Includes battery kit, labor, sub panel, breakers, wire, attachments, EMT, and commissioning. No drywall repair.
$15,000
Tesla Powerwall 3 (lead, outdoor)
Outdoor-mounted lead unit. No drywall repairs included.
$12,500
Tesla Powerwall 3 — expansion
Each expansion unit after the first lead. If two lead units are required, $12,500 each.
$9,200/EXPANSION
APsystems Battery 11 kW (installed)
Standard install by interior sub panel (garage install is extra). No drywall repair.
$12,500
EG4 14 kW lead unit (outdoor)
Outdoor mounted. Indoor mount adds $1,500 (other side of wall) or $15+/ft. Wire run can add up to $4,000 if far from meter.
$12,500
EG4 — expansion unit
Each expansion battery after the first EG4 lead.
$7,000/EXPANSION
Fortress / Franklin
Premium battery system — Fortress or Franklin platforms.
$16,000
Battery-only adder
When selling a battery without solar. Applies to all battery products. Add $1,000 more if Wattsmart (permits, net metering, inspection).
+$2,000
Backup & Switches
04No matches in this category.
10-breaker manual switch (with install)
For generator backup wiring of selected circuits.
$1,200
6-breaker manual switch (with install)
Smaller manual transfer switch for backup circuits.
$1,000
240V outlet for EV charger
Standard quote — final price varies job-by-job.
~$1,000QUOTE PER JOB
Generator inlet
Standard quote — final price varies job-by-job.
~$1,000QUOTE PER JOB
Warranties
03No matches in this category.
Solar Insure 30-yr bumper-to-bumper
Per-watt premium for full 30-year warranty on panels & inverter (battery NOT included).
$0.10/WATT
Solar Insure (panels + inverter)
Per-watt + flat processing fee. Does NOT cover battery.
$0.10/W + $50 PROC
Solar Insure — battery-only
Per-watt of battery capacity + flat processing fee. (~$2,150 on a 14 kW battery.)
$0.15/Wh + $50 PROC
Detach & Reset
03No matches in this category.
Detach & reset — existing customer
If we originally installed the system. Same 45-mile radius applies.
$100/PANEL
Detach & reset — not our customer (under 35°)
Labor only. Roof under 35° pitch. 45-mile radius.
$140/PANEL
Detach & reset — not our customer (45°+)
Labor only. Roof 45° pitch or steeper. 45-mile radius.
$160/PANEL
Construction & Roofing
02No matches in this category.
Roofing first-half-payment float
When Spring Solar floats the first-half roofing payment to the roofer.
$300
Aeroseal
Aeroseal duct-sealing service add-on.
$3,000
Permits & Fees
05No matches in this category.
City permitting overage
We cover up to $500 of city permitting. Anything over is extra. Common overage cities: Ogden, Weber County, Provo, Taylorsville.
VARIES BY CITY
Pass-through — non-approved roofer
Pass-through fee when sales rep brings in a non-approved roofer. More work and liability for Spring Solar.
4%
Pass-through — home improvements / above $3.50/W
Pass-through on home improvements or anything above $3.50/W on the solar side.
4%
Tax strategy for depreciation
Add-on tax service for depreciation strategy.
$600 minUP TO $0.10/W
Solar Tax Service
Standard solar tax service add-on.
$0.10/WATT
Miscellaneous
01No matches in this category.
Window well cover (if needed)
When a window well cover is required for the install.
$150–$250